924 products were found matching your search for Top Bike in 4 shops:

Cult's Max Vu Top Load Stem is built with a 6061 aluminium with solid bolts and a recessed compression bolt area. Designed to bolt in from the underneath of the stem to give it a really clean look, the top plate features a contrasting, custom Cult logo to finish. ###section### Product Specs TYPE: Top Load REACH: 43mm RISE: 30.6mm CLAMPING DIAMETER: 22.2mm WEIGHT: 281.2g (9.92oz)

The Pro Ride XT is a durable roof top bike rack that's super-easy to use and holds your valuable bike securely. The re-designed wheel holders and support arm clamp adjust to help keep your bike in position while you secure it to the carrier. Fast, easy tool-free installation. Fits Thule Aero Blade Edge, Aero Blades, Square Bars and most t-slotted aftermarket racks. Ergonomically designed dial and clamp. Torque limiter tightening dial controls the amount of force applied to the bike frame. Spring-loaded, push-button clamp release makes unloading your bike fast and easy. Frame clamp with extended lower jaw and soft claw pads protects and supports your bike. Imported. Thule 598004 Pro Ride XT Bike Carrier Black

The Top Tube Adapter provides a removable frame piece for use when the bike is required to hang from a bike carrier's horizontal arms. Works for bikes with step-through or other unconventional frame designs. Easy 1-button operation opens locking gates that snap shut around the seat post and stem. Includes Lifetime Limited Warranty. Material: Steel.

Stay stylish and organized on the go with the Piquadro N Zaino Roll-Top DA Bici Porta Computer backpack. Made from durable polyester, this backpack is perfect for carrying your computer while biking.

Roll on the past or relive your childhood on the GT Heritage. Inspired by GT’s Freestyle roots loaded with the details to make this vintage inspired bikes as legendary as their predecessors. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 29" TOP TUBE LENGTH: 23.5" CHAIN STAY LENGTH: 17.4" HEADTUBE ANGLE: 71° SEAT TUBE ANGLE: 72° FORKS: Dyno 87' Pro Compe Design, 100% Cr-Mo 2pc. Steerer, 3/8" Axle Dropouts BARS: Dyno Pretzel Cheat Code 2pc. 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 9° Back STEM: GT Mallet 100% CNC Front Load, 1-1/8", 19mm Rise, 43mm HEADSET: 1 1/8" Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Promax P-1 Aluminum V-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT Smoothie 29 x 2.5" SPROCKET: GT 5mm 36T 86' Performer Design Alloy Chainwheel CRANKS: GT Power Series Alloy 3pc., 175mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Cheat Code Railed GEARING: 25/9 WEIGHT: 30.86lbs ###section### Product Highlights Larger Wheels for that road bike performance with a BMX feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel High-quality Chromoly construction Sealed bearings throughout Strong and durable crankset ###shogun-image-section###

Fit in and look the part during any session with a bike that looks like the pros without putting a hurt on your wallet. The Slammer is a beginner level bike but is durable enough to take the abuse while you dial in your moves. ###section### Product Specs FRAME MATERIAL: Hi-Ten Steel WHEEL SIZE: 20" TOP TUBE LENGTH: 20" CHAIN STAY LENGTH: 13.2" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: GT FS Design, Hi-Ten 2pc. Steerer & Tapered Legs, 31mm OffSet, 3/8” Axle Dropouts BARS: GT Freestyle 2pc., Steel, 8.375” H x28” W, 3° Up, 11° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 40mm HEADSET: 1-1/8” Threadless, Steel BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Steel Body, Loose Ball 3/8” x 150mm Heat Treated Axle, 36h, 15mm Nut FRONT RIM: Alloy Single Wall, 36h REAR HUB: Steel Body, Loose Ball 3/8” x 150mm Heat Treated Axle, 15mm Nut Front, Alloy Body, 1 Loose Ball, 4 Sealed Bearing 14mm x 180mm Axle, 9T Cassette, 36 Hole, 17mm Nut Rear. REAR RIM: Alloy Single Wall, 36h TYRES: Innova 20x2.2” Front 20x2.3" Rear SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Cr-Mo 3pc., 170mm Arms BB: American Loose Ball Bearing PEDALS: GT Low Profile FS Platform Design SEAT: Railed GEARING: 25/9 WEIGHT: 27lbs ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm Great for Riders who are just too small to handle a full size 20" BMX Strong Hi-ten steel construction Strong and durable crankset ###shogun-image-section###

Roll on the past or relive your childhood on the GT Heritage. Inspired by GT’s Freestyle roots loaded with the details to make this vintage inspired bikes as legendary as their predecessors. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 24" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 15.56" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 71° FORKS: Dyno 87' Pro Compe Design, 100% Cr-Mo 2pc. Steerer, 3/8" Axle Dropouts BARS: Dyno Pretzel Cheat Code 2pc. 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 9° Back STEM: GT Mallet 100% CNC Front Load, 1-1/8", 19mm Rise, 43mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Promax P-1 Aluminum V-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT Smoothie 24 x 2.5" SPROCKET: GT 5mm 36T 86' Performer Design Alloy Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 175mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Cheat Code Railed GEARING: 36/16 WEIGHT: TBC ###section### Product Highlights 24" Wheels for that classic BMX cruiser feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel High-quality Chromoly construction Sealed bearings throughout Strong and durable crankset ###shogun-image-section###

The GT Mach One is designed to be the ideal introduction into the world of BMX racing. With a 6061 T-6 alloy frame inspired by the GT Speed Series frame, along with reverse dropouts, a GT top load stem, V-brakes and high quality tyres. See below for full specs. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium WHEEL SIZE: 20" TOP TUBE LENGTH: 19.5" CHAIN STAY LENGTH: 13.62" HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 70° FORKS: GT BMX Race, Hi-Ten Steel 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Race, Steel, 6.5”Hx26”W, 8°Back, 4°Up, 19mm O.D. CrossBar STEM: GT Top Load, 1”, 40mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Alloy V-type FRONT HUB: Steel Body, 28h, 3/8”Axle FRONT RIM: Alloy Double Wall, 28h REAR HUB: Steel Flip Flop Thread-onBody, Freewheel, 28h, 3/8”Axle REAR RIM: Alloy Double Wall, 28h TYRES: Kenda Race, 20x1-3/8” SPROCKET: 38T Steel Chain Ring CRANKS: GT Alloy Forged 3pc, 165mm, SquareTaper BB: Euro PEDALS: TBC SEAT: GT Uni Mini Padded GEARING: 38/16 WEIGHT: TBC ###section### Product Highlights Expert sized BMX bike. Designed for the needs of racers who are 5ft" - 5ft 4" (150cm - 165cm) A BMX race specific bike perfect for racers who want to take it to the next level Lightweight aluminium construction Durable double wall rims V-brake system on welded mounts ###shogun-image-section###

The Air is GTs entry level & most affordable bike in their range, Its still built with quality parts, Hi-Ten Steel frame, fork & handlebar rear cassette hub and much more. An ideal first bike for a beginner rider. ###section### Product Specs FRAME MATERIAL: Hi-Ten Steel WHEEL SIZE: 20" TOP TUBE LENGTH: 20" CHAIN STAY LENGTH: 13.2" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: GT FS Design, Hi-Ten 2pc. Steerer & Tapered Legs, 31mm OffSet, 3/8” Axle Dropouts BARS: GT Freestyle 2pc., Steel, 8.375” H x28” W, 3° Up, 11° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 40mm HEADSET: 1-1/8” Threadless, Steel BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Steel Body, Loose Ball 3/8” x 150mm Heat Treated Axle, 36h, 15mm Nut FRONT RIM: Alloy Single Wall, 36h REAR HUB: Steel Body, LooseBall, 14mm Adapter x 180mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Single Wall, 36h TYRES: Innova 20x2.3” Front 20x2.2" Rear SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Cr-Mo 3pc., 170mm Arms BB: American Loose Ball Bearing PEDALS: GT Low Profile FS Platform Design SEAT: Railed GEARING: 25/9 WEIGHT: 26lbs ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm Great for Riders who are just too small to handle a full size 20" BMX Strong Hi-ten steel construction Strong and durable crankset Geometry designed with the smaller rider in mind ###shogun-image-section###

The GT Mach One is designed to be the ideal introduction into the world of BMX racing. With a 6061 T-6 alloy frame inspired by the GT Speed Series frame, along with reverse dropouts, a GT top load stem, V-brakes and high quality tyres. See below for full specs. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium WHEEL SIZE: 16" TOP TUBE LENGTH: 15.5" CHAIN STAY LENGTH: 11.6" HEAD TUBE ANGLE: 72° SEAT TUBE ANGLE: 71° FORKS: GT BMX Race, Hi-Ten Steel 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Race, Steel, 3”Hx17.7”W STEM: Alloy Ahead Stem, 37mm HEADSET: 1-1/8”Threadless,Steel BRAKE MOUNTS: Welded BRAKES: Alloy V-type FRONT HUB: Steel Body, 28h, 3/8”Axle FRONT RIM: Alloy Single Wall, 28h REAR HUB: Steel Flip Flop Thread-onBody, Freewheel, 28h, 3/8”Axle REAR RIM: Alloy Single Wall, 28h TYRES: Innova,16x1.75” SPROCKET: 36T Steel Chain Ring CRANKS: Steel Forged 1pc., 114mm Arm BB: US PEDALS: TBC SEAT: GT Uni Mini Padded GEARING: 36/16 WEIGHT: TBC ###section### Product Highlights BMX Race inspired beginner bike with smaller wheels for the little ones who are just learning to ride A great BMX race inspired kids BMX bike Lightweight aluminium construction Durable double wall rims Strong responsive V-brake ###shogun-image-section###

The Performer has been a staple in freestyle BMX for numerous years and today it is just as equipped to give younger riders the confidence to make the most of every session. 16" version for smaller & younger riders. ###section### Product Specs FRAME MATERIAL: Hi-Ten Steel WHEEL SIZE: 16" TOP TUBE LENGTH: 16.5" CHAIN STAY LENGTH: 11.7" HEADTUBE ANGLE: 74° SEAT TUBE ANGLE: 71° FORKS: GT FS Design, Hi-Ten 2pc. Steerer & Tapered Legs, 31mm OffSet, 3/8” Axle Dropouts BARS: GT Freestyle 2pc., Steel, 7”H x 23.625”W, 3° Up, 11° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 40mm HEADSET: 1-1/8” Threadless, Steel BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Steel Body, Loose Ball 3/8” x 150mm Heat Treated Axle, 20h, 15mm Nut FRONT RIM: Alloy Single Wall, 20h REAR HUB: Alloy Body, 1 Loose Ball, 4 Sealed Bearing 3/8 x 165mm Axle, 9T Cassette, 20h, 15mm Nut REAR RIM: Alloy Single Wall, 20h TYRES: Innova 16 x 2.1” SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Cr-Mo 3Pc., 127mm Arm BB: American Loose Ball Bearing PEDALS: GT Mini Size Platform, PP Material SEAT: Integrated Saddle w/ Post GEARING: 25/9 WEIGHT: 21lbs ###section### Product Highlights Smaller 16" Wheels - The Perfect fit for for 5-8 years olds (3ft - 3ft 6 / 90cm - 105cm) Specifically designed for the smaller rider, just starting out in BMX Strong Hi-ten steel construction Traditional BMX geometry Strong and durable crankset ###shogun-image-section###

The GT Mach One is designed to be the ideal introduction into the world of BMX racing. With a 6061 T-6 alloy frame inspired by the GT Speed Series frame, along with reverse dropouts, a GT top load stem, V-brakes and high quality tyres. See below for full specs. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium WHEEL SIZE: 24" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 15.43" HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 70° FORKS: GT BMX Race, Hi-Ten Steel 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Race, Steel, 6.5”H x 29”W, 4° Up, 8° Back STEM: GT Top Load, 1”, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Alloy V-type FRONT HUB: Steel Body, 36H, 3/8” Axle FRONT RIM: Alloy Single Wall, 36h REAR HUB: Steel Flip Flop Thread-onBody, Freewheel, 36h, 3/8”Axle REAR RIM: Alloy Single Wall, 36h TYRES: GT Wing 24 x 2.1” (front), GT Wing 24 x 1.75” (rear) SPROCKET: 42T Steel Chain Ring CRANKS: GT Power Series Tubular Cr-Mo 3pc., 175mm Arms, 19mm x 8T Splined Spindle, Steel Spider, BB: Euro PEDALS: TBC SEAT: Railed GEARING: 42/18 WEIGHT: TBC ###section### Product Highlights Cruiser BMX Race bike with larger 24" wheels. A BMX race specific bike perfect for racers who want to take it to the next level Lightweight aluminium construction Lightweight aluminium frame V-brake system on welded mounts ###shogun-image-section###

The GT Mach One Pro was desinged to be the perfect introduction into the world of racing, with its 20.6" top tube length, 20" tires and race geometry it's ready to go whenever you are. It's built with a 6061-T6 aluminium frame paired Hi-ten steel forks and bars too keep the overall weight down while keeping the front end tough and durable. The Mach One Pro features a GT Power Series Tubular Chromoly crankset so you can put that power down responsively when it's needed. For speed the Mach One Pro is loaded with a 10mm front hub and a 10mm freewheel hub at the back both laced to single walled alloy rims all wrapped up with a pair of 1.75" wide GT Wing tires. ###section### Product Specs FRAME MATERIAL: Aluminium WHEEL SIZE: 20" TOP TUBE LENGTH: 20.6" CHAIN STAY LENGTH: 14.4" HEADTUBE ANGLE: 74° SEAT TUBE ANGLE: 72° FORKS: Chromoly Steerer Tube and Hi-Ten Legs BARS: - MATERIAL: Steel - TYPE: 2-Piece - RISE: 8.25" Rise - WIDTH: 29" Width STEM: Alloy Top Load HEADSET: 1 1/8" BRAKE MOUNTS: Welded Mount BRAKES: V-Brake FRONT HUB: 10mm Loose Ball FRONT RIM: Single Wall REAR HUB: 10mm Freewheel Hub REAR RIM: Single Wall TYRES: 1.75" SPROCKET: 38T CRANKS: - MATERIAL: Chromoly - TYPE: 3-Piece - ARM LENGTH: 175mm BB: Euro PEDALS: Plastic SEAT: Combo Seat/Post GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) BMX Racing specific bike Lightweight aluminium build V-brake system on welded mounts Responsive brakes ###shogun-image-section###

The GT Mach One is designed to be the ideal introduction into the world of BMX racing. With a 6061 T-6 alloy frame inspired by the GT Speed Series frame, along with reverse dropouts, a GT top load stem, V-brakes and high quality tyres. See below for full specs. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium WHEEL SIZE: 20" TOP TUBE LENGTH: 18.75" CHAIN STAY LENGTH: 13.18" HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 70° FORKS: GT BMX Race, Hi-Ten Steel 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Race, Steel, 4”Hx24”w/8°Back, 2°Up, 19mm O.D. CrossBar STEM: GT Top Load, 1”, 40mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Alloy V-type FRONT HUB: Steel Body, 28h, 3/8”Axle FRONT RIM: Alloy Double Wall, 28h REAR HUB: Steel Flip Flop Thread-onBody, Freewheel, 28h, 3/8”Axle REAR RIM: Alloy Double Wall, 28h TYRES: Kenda Race, 20x1-3/8” SPROCKET: 38T Steel Chain Ring CRANKS: GT Alloy Forged 3pc, 152mm, SquareTaper BB: Euro PEDALS: TBC SEAT: GT Uni Mini Padded GEARING: 38/16 WEIGHT: TBC ###section### Product Highlights Junior sized BMX bike. Designed for the needs of racers who are 4ft 6" - 5ft 1" (138cm - 155cm) A BMX race specific bike great for those riders just getting started Lightweight aluminium construction Durable double wall rims V-brake system on welded mounts ###shogun-image-section###

GT's Speed Series Pro XXL Bike is a top of the line BMX designed and built specifically for racing across dirt and pump tracks. With an aluminium frame the Pro XXL keeps the weight down while the chromoly front end keeps it as strong as possible where it matters most. The 21.75" top tube length makes this bike ideal fro riders over 180/185cm. The Speed Series Pro XXL also features long 175mm crank arms are perfect for racing and jumping giving you that extra power, a combo seat that's more simple and lightweight than separate options and a powerful 44/16 gearing ratio. ###section### Product Specs FRAME MATERIAL: Aluminium WHEEL SIZE: 20" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 15.43" HEADTUBE ANGLE: 74° SEAT TUBE ANGLE: 72° FORKS: 100% Chromoly BARS: - MATERIAL: - TYPE: - RISE: 8.375" Rise - WIDTH: 29" Width STEM: Alloy Top Load HEADSET: 1 1/8" BRAKE MOUNTS: Disc BRAKES: Hydraulic Disc Brake FRONT HUB: 10mm Sealed FRONT RIM: Double Wall REAR HUB: 10mm Freewheel Hub REAR RIM: Double Wall TYRES: 1.75" SPROCKET: 44T CRANKS: - MATERIAL: Alloy - TYPE: 2-Piece - ARM LENGTH: 175mm BB: BB86 PEDALS: Plastic SEAT: Combo Seat/Post GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) BMX Racing specific bike Lightweight aluminium build Ideal for racing Responsive brakes ###shogun-image-section###

The GT Mach One is designed to be the ideal introduction into the world of BMX racing. With a 6061 T-6 alloy frame inspired by the GT Speed Series frame, along with reverse dropouts, a GT top load stem, V-brakes and high quality tyres. See below for full specs. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium WHEEL SIZE: 20" TOP TUBE LENGTH: 17.75" CHAIN STAY LENGTH: 13.18" HEAD TUBE ANGLE: 72° SEAT TUBE ANGLE: 70° FORKS: GT BMX Race, Hi-Ten Steel 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Race, Steel, 2”Hx22”w/8°Back, 2°Up STEM: GT Top Load, 1”, 40mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Alloy V-type FRONT HUB: Steel Body, 28h, 3/8”Axle FRONT RIM: Alloy Double Wall, 28h REAR HUB: Steel Flip Flop Thread-onBody, Freewheel, 28h, 3/8”Axle REAR RIM: Alloy Double Wall, 28h TYRES: Kenda Race, 20x1-3/8” SPROCKET: 38T Steel Chain Ring CRANKS: GT Alloy Forged 3pc, 140mm, SquareTaper BB: Euro PEDALS: TBC SEAT: GT Uni Mini Padded GEARING: 38/16 WEIGHT: TBC ###section### Product Highlights Mini size. Designed specifically for the smallest racers. Approx 4ft 2" - 4ft 10" (127cm - 148cm) A great BMX race inspired kids BMX bike Lightweight aluminium construction Durable double wall rims V-brake system on welded mounts ###shogun-image-section###

The GT Mach One is designed to be the ideal introduction into the world of BMX racing. With a 6061 T-6 alloy frame inspired by the GT Speed Series frame, along with reverse dropouts, a GT top load stem, V-brakes and high quality tyres. See below for full specs. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 14.92" HEAD TUBE ANGLE: 74° SEAT TUBE ANGLE: 72° FORKS: GT BMX Race, Hi-Ten Steel 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Race, Steel, 8.25”H x 29”W, 3° Up, 11° Back STEM: GT Top Load, 1”, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Alloy V-type FRONT HUB: Steel Body, 36H, 3/8” Axle FRONT RIM: Alloy Single Wall, 36h REAR HUB: Steel Flip Flop Thread-onBody, Freewheel, 36h, 3/8”Axle REAR RIM: Alloy Single Wall, 36h TYRES: GT Wing 20 x 1.75” SPROCKET: 44T Steel Chain Ring CRANKS: GT Power Series Tubular Cr-Mo 3pc., 175mm Arms, 19mm x 8T Splined Spindle, Steel Spider, BB: Euro PEDALS: TBC SEAT: Railed GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Pro sized BMX race bike for riders who need a full size BMX. Typically suited to riders 5ft 3" to 5ft 8" (160cm - 175cm) A BMX race specific bike perfect for racers who want to take it to the next level Lightweight aluminium construction Lightweight aluminium frame V-brake system on welded mounts ###shogun-image-section###

The Performer has been a staple in freestyle BMX for numerous years and today it is just as equipped to give younger riders the confidence to make the most of every session. 18" version for smaller & younger riders. ###section### Product Specs FRAME MATERIAL: Hi-Ten Steel WHEEL SIZE: 18" TOP TUBE LENGTH: 18" CHAIN STAY LENGTH: 12.7" HEADTUBE ANGLE: 74° SEAT TUBE ANGLE: 71° FORKS: GT FS Design, Hi-Ten 2pc. Steerer & Tapered Legs, 31mm OffSet, 3/8” Axle Dropouts BARS: GT Freestyle 2pc., Steel, 8”H x 27”W, 3° Up, 11° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 40mm HEADSET: 1-1/8” Threadless, Steel BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Steel Body, Loose Ball 3/8” x 150mm Heat Treated Axle, 20h, 15mm Nut FRONT RIM: Alloy Single Wall, 20h REAR HUB: Alloy Body, 1 Loose Ball, 4 Sealed Bearing 3/8 x 165mm Axle, 9T Cassette, 20h, 15mm Nut REAR RIM: Alloy Single Wall, 20h TYRES: Innova 16 x 2.1” SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Cr-Mo 3pc., 170mm Arms BB: American Loose Ball Bearing PEDALS: GT Mini Size Platform, PP Material SEAT: Integrated Saddle w/ Post GEARING: 25/9 WEIGHT: 23lbs ###section### Product Highlights 18" Wheels are great for riders just a bit too small to manoeuvre a full size 20" Bike (approx 3ft 4 - 4ft 4 / 100cm-130cm) Great for Riders who are just too small to handle a full size 20" BMX Strong Hi-ten steel construction Traditional BMX geometry Strong and durable crankset ###shogun-image-section###

Haro's Lineage Ground Master Bike takes many of its design cues from 1992, the frame and the graphics especially both scream that era. It's built from chromoly throughout the frame, fork and bars with a twin top tube design making the Lineage incredibly strong and durable. Both the Lineage fork and bars are made from fully heat-treated chromoly for strength with tapered legs on the forks while the Kneesaver Bars boast a unique 4-piece design that reduces the chances of you smashing your knees into them. Despite being inspired by 90s styles and designs the Lineage Ground Master features a lot of modern details like an hourglass shaped Mid Bottom Bracket, integrated headtube and clean cable routing for brake cables. Haro Lineage parts throughout give the Ground Master a pro-level feel, with a fully sealed front and rear freecoaster hub laced to double wall rims with Haro's HPF Tyres making sure there's plenty of traction. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 20" TOP TUBE LENGTH: 19.5" CHAIN STAY LENGTH: 13.7" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 70° FORKS: 100% Chromoly With Tapered Fork Legs BARS: - MATERIAL: Chromoly - TYPE: 4-Piece - RISE: 8.5" Rise - WIDTH: STEM: Alloy Top Load HEADSET: Integrated BRAKE MOUNTS: Welded Mount BRAKES: U-Brake FRONT HUB: 10mm Sealed FRONT RIM: Double Wall REAR HUB: Sealed Freecoaster REAR RIM: Double Wall TYRES: 2.0" SPROCKET: 25t CRANKS: - MATERIAL: Chromoly - TYPE: 3-Piece - ARM LENGTH: 165mm BB: 19mm Mid PEDALS: Alloy SEAT: Stealth Seat GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm A great all rounder suitable for any type of riding High-quality Chromoly construction Integrated seat clamp Sealed bearings throughout ###shogun-image-section###

BMX Bash Guard subculture is definitely a thing and Haro are fully embracing and celebrating that with the Lineage Sport Bashguard. Originally launched in 1992 this reissue blends that retro look with modern construction and parts. It's built from chromoly throughout the frame, fork and bars with a twin top tube design making the Lineage incredibly strong and durable. Both the Lineage fork and bars are made from fully heat-treated chromoly for strength with tapered legs on the forks while the Kneesaver Bars boast a unique 4-piece design that reduces the chances of you smashing your knees into them. The Haro Lineage Sport Bashguard Bike has a slightly larger 21" top tube making it perfect for taller riders with an hourglass mid bottom bracket, seatstay brake mounts and Lineage parts throughout giving it a pro-level feel. It's finished with a reliable wheelset wrapped with Haro HPF Tyres that roll fast and stay light. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 20" TOP TUBE LENGTH: 21" CHAIN STAY LENGTH: 13.7" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71.5° FORKS: 100% Chromoly With Tapered Fork Legs BARS: - MATERIAL: Chromoly - TYPE: 4-Piece - RISE: 8.5" Rise - WIDTH: STEM: Alloy Top Load HEADSET: Integrated BRAKE MOUNTS: Welded Mount BRAKES: U-Brake FRONT HUB: 10mm Sealed FRONT RIM: Double Wall REAR HUB: Sealed Cassette REAR RIM: Double Wall TYRES: 2.2" SPROCKET: 39t CRANKS: - MATERIAL: Chromoly - TYPE: 3-Piece - ARM LENGTH: 175mm BB: 22mm Mid PEDALS: Alloy SEAT: Stealth Seat GEARING: 39/14 WEIGHT: TBC ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) A great all rounder suitable for any type of riding High-quality Chromoly construction Integrated seat clamp Sealed bearings throughout ###shogun-image-section###